|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: how to connect phono section of HH Scott 121-C posted by miners on July 11, 2023 at 06:16:10:
I don't have the Scott 121-C schematic in front of me, but many preamp internal gain stages that I've seen can be bypassed by using the Tape Monitor Out jack.Your cartridge's output would go into one of the magnetic inputs on the Scott, and then an adapter as shown above would be used between the Scott's Monitor jack and into a spare set of line inputs on your main preamp.
You're essentially using the Scott as a separate phono stage for RIAA (or other curve) equalization, and your line stage for preamplification.
Edits: 07/12/23
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- "by passing Scott's internal preamp" - 1973shovel 05:13:48 07/12/23 (2)
- RE: "by passing Scott's internal preamp" - miners 05:58:28 07/12/23 (1)
- You're welcome. Let us know how it works out (nt) - 1973shovel 07:30:37 07/12/23 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
