|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: Re: Install Isolation Transformer on Zenith Console? posted by Eli Duttman on April 23, 2007 at 17:00:53:
Hi Eli,I haven't succeeded yet in sending the image. Anyway, the B+ circuit from the plug consists of a series 15 ohm resistor, then a .1 microfard cap to ground, then a diode, then a 150 microfarad cap to ground. That is supposed to yield 148 V. Your idea about grounding the chassis is great. I think I may have the bridge rectifier from a Cary SE-1. Would it still be safer to use a bridge? What would you recommend for a similar B+?
Thanks a lot,
David
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Power Supply Circuit - David Lawrence 19:57:33 04/23/07 (1)
- Re: Power Supply Circuit - Eli Duttman 00:36:46 04/24/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
