|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
|
|
Vintage Asylum Classic gear from yesteryear; vintage audio standing the test of time. |
|
In Reply to: are all Scott bottom covers as flimsy as mine? posted by microbe on April 4, 2007 at 14:24:41:
I have a 299A with the same aluminum bottom. It is strong enough, but too thin to hold an 8/32" thread for any length of time. I am working on the same problem but wish to retain the wood case. I bought some 1" x 1/8" thick anodized aluminum flat bar and plan to cut 1 1/2" long pieces and rivet then on the inside of the bottom where the feet will screw in. That will give enough "meat" to tap a proper thread.
The chassis is soft aluminum but it sure polishes up nice.
Larry.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: are all Scott bottom covers as flimsy as mine? - 33 1/3 23:38:52 04/06/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
