Bell Carillon schematic needed

Vintage Asylum

Classic gear from yesteryear; vintage audio standing the test of time.

I have a Bell Carillon Model 6060 amplifier I've been updating and
I've had a problem replacing the first stage filter in the HV filter section.
I have gotten a schematic downloaded from the web to help
troubleshoot, but mine had a floating first stage EC with a wrap around it,
and the one in the schematic I have shows the first filter cap with negative grounded. There's also other resistors
tagged to the outside of this first stage cap as well as the center tap from the HV
supply transformer. However, there is no tie to ground that's obvious.
Basically it's confounding me and the schematic I have is not helping as I would expect it to.
Any sick individuals out there with more schematics of this unit? I've tried the usual schematic
websites to no avail. The schematic I have looks to be a Sams Photofact, but I only have
pages 3 and 4 from it, and I've seen Sams that were incorrect before.
The unit looks like this one on eBay:
http://cgi.ebay.com/BELL-6060-Carillon-Tube-Amplifier-6CA7-ULTRALINEAR_W0QQitemZ280094966000Q
QcategoryZ50593QQssPageNameZWDVWQQrdZ1QQcmdZViewItem?hash=item280094966000
Thanks in advance for any and all help.
RFG

This post is made possible by the generous support of people like you and our sponsors:

VH Audio

Topic - Bell Carillon schematic needed - RFGumby 17:46:10 03/21/07 (1)

Re: Bell Carillon schematic needed - SteveBrown 03:33:31 03/22/07 (0)

You can not post to an archived thread.