In Reply to: vintage tuner operating voltages posted by louie3 on October 3, 2023 at 08:20:41:
I usually measure both the B+ and filament voltages and if necessary add a series resistor to either/both sources to get them "in the ballpark" - i.e. 6.3V for filaments (If that is what it's supposed to be) and whatever is the first DC voltage shown on the B+ filtering of the schematic. Also check the lower voltages "downstream" from that to see if they're close to any other voltages shown on the schematic.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: vintage tuner operating voltages - stellavox 09:06:48 10/05/23 (0)