|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Wildfire is alive! posted by Jimmy on March 30, 2006 at 04:57:05:
Of course! Its in the breadboard stage right now. The final version will be an integrated with a preamp stage, remote volume control and Nixie tube volume indicator.I'm getting the tranformers and chokes with brass bell ends and I think I'm going to use a simple black top plate (I'm more of a woodwoorker so I think I'll let front pannel express do the top plate. i'm going to do a laminate of maple and walnut for the chasis with rounded edges that will lets the laminations stand out. I'm probably going to do a V groove on the sides that will also let the laminations show through.
The power supply is going to be a little more industrial, I'm going for brushed stainless steel look for that with SS cylinders at the corners.
John S.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Wildfire is alive! - John Swenson 23:00:22 03/30/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
