I gotta go with the Dr....... Those Mills wire-wounds are sa-weeeet!!!! NT - EZ_Angus

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Follow Ups Full Thread

Topic - My 2A3 amp ticks! - Super_BQ 21:27:14 03/22/06 (39)

New Discovery! - no tick on different speakers - Super_BQ 04:34:00 03/25/06 (1)

Are you sure its the speakers? - Saul P 07:02:05 03/27/06 (0)

Schematic of amp - Super_BQ 13:45:55 03/24/06 (0)

Brandon!! - MIchael Samra 06:41:19 03/24/06 (4)

Plate chokes in the mh range. - snert 12:50:28 03/24/06 (3)

Re: Plate chokes in the mh range. - MIchael Samra 13:13:02 03/25/06 (2)

Re: Plate chokes in the mh range. - snert 13:49:55 03/25/06 (1)

Re: Plate chokes in the mh range. - MIchael Samra 20:23:05 03/25/06 (0)

Just in case....make sure you don't have a cell phone near by - Russ57 11:42:54 03/23/06 (8)

gotta agree with Russ - Dave Cigna 16:31:46 03/23/06 (5)

How to go from "there" - Russ57 16:21:30 03/24/06 (2)

Re: How to go from "there" - Dave Cigna 15:04:07 03/25/06 (1)

Thanks Dave...my experience.... - Russ57 05:37:46 03/26/06 (0)

another thing that causes clicks - Dave Cigna 16:35:58 03/23/06 (1)

Re: another thing that causes clicks - Jimmy 10:06:06 03/24/06 (0)

Re: Just in case....make sure you don't have a cell phone near by - Super_BQ 12:41:06 03/23/06 (1)

Re: Just in case....make sure you don't have a cell phone near by - Matts_ 13:21:00 03/23/06 (0)

One reason of periodic ticking is - sser2 10:39:02 03/23/06 (0)

Re: My 2A3 amp ticks! - eyes 07:20:36 03/23/06 (3)

Re: My 2A3 amp ticks! - Super_BQ 12:15:29 03/23/06 (0)

Re: My 2A3 amp ticks! - kyle 09:52:32 03/23/06 (0)

Re: My 2A3 amp ticks! - PeterP 09:02:21 03/23/06 (0)

I gotta go with the Dr....... Those Mills wire-wounds are sa-weeeet!!!! NT - EZ_Angus 06:27:55 03/23/06 (0)

Re: My 2A3 amp ticks! - shermanr@prw.net 05:36:09 03/23/06 (1)

Tested Power Supply Caps - Super_BQ 14:52:35 03/23/06 (0)

Re: My 2A3 amp ticks! - morrowaudio 05:07:30 03/23/06 (3)

Re: My 2A3 amp ticks! - Super_BQ 12:18:43 03/23/06 (2)

Get tantalum resistors here... - morrowaudio 19:01:44 03/23/06 (1)

Re: Get tantalum resistors here... - morrowaudio 19:03:43 03/23/06 (0)

Did you double check for bad solder? (nt) - arnoldc 23:54:50 03/22/06 (1)

Re: Did you double check for bad solder? (nt) - Super_BQ 14:55:23 03/23/06 (0)

A Bad Ticker !! - drlowmu 23:31:51 03/22/06 (7)

agreed - avian 22:14:46 03/23/06 (3)

Inductance isn't always a bad thing - badman 08:35:03 03/25/06 (2)

Yes, but........ - drlowmu 16:12:50 03/27/06 (1)

Re: Yes, but........ - dave slagle 05:33:13 03/28/06 (0)

Re: A Bad Ticker !! - morrowaudio 05:04:10 03/23/06 (2)

Resistors - Super_BQ 12:22:42 03/23/06 (0)

Have YOU........ - drlowmu 07:33:58 03/23/06 (0)

Follow Ups

I gotta go with the Dr....... Those Mills wire-wounds are sa-weeeet!!!! NT - EZ_Angus 06:27:55 03/23/06 (0)