|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: EL34 SET Int' amp schematic for Tamura F-5002 posted by iamthanik@hotmail.com on March 10, 2006 at 06:49:31:
Here is the thing..Im very fond of the el84 tube also and I can assure an el34 is not going to solve your problem. If your getting muddiness in the amp,its likely a feedback issue in relationship to the tranformers that you are using..I cant belive all the tubes you had mentioned to be muddy being they are time honored triodes that have been around in audio circles for years.The el34 is no doubt going to sound brittle and dry in SE fashion by comparsion to what your used to with the el84.
Talk to Elektron Robert and he can probably get you squared away on your SE design..Dont rule out the 300b yet because I think its a feedback issue or maybe needs some feedback in relationship to the output tranny.You may need to use an innerstage tranny for impeadance matching in the driver part of the circuit.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Talk to Elektron - MIchael Samra 10:58:57 03/10/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
