OPT Cathode NFB connection questions.

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

I'm plan to use the Cathode NFB wiring on my Tamura OPT .
as the moment I just use common cathode bias arangement .
please see my drawing below .
note: the far left drawing is my current set up without using Cathode NFB and the right drawing is the one I'm plan to use which I will disconnect the two tube cathode resistors from the ground and connect eachj of them in series with the Cathode NFB wiring of the OPT and the centre tap to ground,
please advise me if I have any wrong here .
Thanks all .
LT

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

Topic - OPT Cathode NFB connection questions. - lovetube 20:51:08 02/15/06 (6)

Re: OPT Cathode NFB connection questions. - Chris O 08:06:39 02/16/06 (5)

Chris .check this out - lovetube 16:02:26 02/16/06 (4)

Why not do as japanese do? (nt) - alex 06:11:10 02/18/06 (0)

check this out - marnold 19:09:47 02/16/06 (2)

Re: check this out - lovetube 19:20:56 02/16/06 (1)

Re: check this out - marnold 19:52:05 02/16/06 (0)

You can not post to an archived thread.