|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: hammond 1645 posted by shermanr@prw.net on February 2, 2006 at 08:20:46:
Richard, thanks for your input. I have a project in mind that will ultimately use Luhndal amorphous OT, but they are a little over budget at the moment, so I am looking for a good unit to tide me over. I presently have 1615's in there (pp 2a3's), and they sound very good, but long term I plan to make this amp usable with either 2a3 or 300B, and the 1615 isn't up to that task. One thing I noticed about the 1615 is the waveform starts deforming right at 30hz (at 8w, full power is about 10w) and looks really bad at 20hz. On the other hand, it looks good and stays flat out past 70khz! Once again, thanks for your input.
Jim
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: hammond 1645 - Jim Womble 11:31:15 02/02/06 (2)
- Re: hammond 1645 - shermanr@prw.net 05:20:03 02/03/06 (1)
- you get what you pay for - Joel Tunnah 08:18:00 02/03/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
