Shielding and Ventilation

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

24.111.154.187

I am planning to put my Diyclub CT-2 phono stage board with 5670 tubes (reportedly better than their LS-37) in a chassis, and am wondering about the trade-off between shielding and ventilation. (The power supply is in a separate box with an umbilical.) It would be hard to get the small tubes out through the top of a chassis into tube shields, because there are some tall caps on the board. Would sticking the whole thing in a ventilated box (one of the Par-metal aluminum designs) likely be alright with regard to shielding? Of course a lot of preamps such as the Dyna Pas have no ventilation at all. Thanks,
David

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Topic - Shielding and Ventilation - David Lawrence 15:45:20 01/28/06 (2)

Re: Shielding and Ventilation - Vatron 06:21:55 01/29/06 (1)

Re: Shielding and Ventilation - David Lawrence 11:43:36 01/29/06 (0)

You can not post to an archived thread.