Kudos to Ron for the PS8 Module

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

Not affiliated with the vendor (Welborn) but wanted to pass on positive experiece with Ron's PS8 power supply module. This is a self-contained PS board with regulated heater plus basic filter for HT. While the HT uses SS diodes, those using tube rectifier could easily adapt. The board is nice and thick, well labled. The whole thing probably took me 20 minutes to build, and the cool part is that it can now be transported into multiple preamp projects (would even support a 2A3 or similar amp). Only change I'd make would be to include an option for a bleeder for the HT, or better yet, a bleeder that could also bias up the heater supply. Anyway, Ron, good job as usual! Almost forgot, the total profile is under 2" high so it fits into a Hammond 2" chassis nicely.

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - Kudos to Ron for the PS8 Module - SteveBrown 07:26:55 01/27/06 (0)

You can not post to an archived thread.