|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: PSU capacitors sizes posted by sandroN on January 5, 2006 at 12:34:48:
The cap that immedeatly follows the rectifier should be small when using tube rectifiers. This is to keep the peak charging current within the tubes capability. With solid state rectifiers this is not such an issue.The filter after the choke can be larger because the choke limits the charging current to the second cap, therebye protectng the rectifier. In my experience larger caps afte the choke work better. Place them as close to the output stage as practicle.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: PSU capacitors sizes - beermanpete@socal.rr.com 20:00:38 01/05/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
