|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: You won't get much gain out of a 6SN7! posted by grhughes on December 18, 2005 at 06:46:51:
...just takes 3 gain stages instead of 2 for a MM input. I've built one with 3/2 6CG7 per channel and one with 3/2 5687 or 7044 per channel (not a good idea -- heater hum is intolerable with those tubes!)Problem is you're amplifying more noise as well, so I can see why you wouldn't want to do it that way. Adding another tube stage for MC would be right out.
Next one will probably contain unbypassed 12AX7s and a cathode follower driver of some sort, so I can keep my passive split RIAA network.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Not impossible... - Mr. Crankypants 20:30:12 12/22/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
