|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Dyna SCA-35 output transformer used at pre-amp out posted by Russell DeAnna on December 14, 2005 at 09:12:39:
I'm not saying that the Dyna 565Z would be a good or bad pre-amp output transformer, but 10ma. of DC will most likely saturate the core and at that point it will not sound good. Without the DC it might stand a chance of sounding good.
I have a pair of UTC LS 151 16K:600 ohm output transformers rated at 7hz to 50K hz 0 ma. DC. I'm sure they would be great but not with plate current running through them.Most push pull output transformers will not tolerate more than 1ma. of DC. Some won't even take that.
Tre'
Have Fun and Enjoy the Music
"Still working the problem"
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Dyna SCA-35 output transformer used at pre-amp out - Tre' 09:41:54 12/14/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]