I use CCS feeding VR tubes at the ouput of my power supplies (preamp and driver stage supplies)

Follow Ups Full Thread

Topic - CCS study in depth, what do you think this approach - Eric Chan 23:34:14 04/24/24 (36)

my 2 pennies - Gordon Rankin 09:08:48 05/07/24 (3)

RE: my 2 pennies - Eric Chan 11:32:06 05/08/24 (2)

That Might be the Wrong Question - Triode_Kingdom 01:00:15 05/13/24 (0)

RE: my 2 pennies - Gordon Rankin 11:12:45 05/10/24 (0)

I have found a wonderful explanation on adding resistor in series to CCS - Eric Chan 09:25:10 05/01/24 (8)

Great find! - Paul Joppa 21:10:49 05/01/24 (7)

RE: Great find! - Eric Chan 00:14:28 05/02/24 (6)

RE: Great find! - Paul Joppa 14:02:35 05/03/24 (5)

I recall that Emotive is using CCS and tube voltage stabilizers to feed 12bh4a line stage - Wojciech 10:40:12 05/07/24 (4)

RE: I recall that Emotive is using CCS and tube voltage stabilizers to feed 12bh4a line stage - PakProtector 16:35:33 05/09/24 (2)

RE: I recall that Emotive is using CCS and tube voltage stabilizers to feed 12bh4a line stage - Wojciech 20:18:50 05/09/24 (1)

RE: I recall that Emotive is using CCS and tube voltage stabilizers to feed 12bh4a line stage - PakProtector 01:01:56 05/10/24 (0)

I use CCS feeding VR tubes at the ouput of my power supplies (preamp and driver stage supplies) - Tre' 10:54:28 05/07/24 (0)

RE: CCS study in depth, what do you think this approach - Eric Chan 23:25:46 04/25/24 (5)

RE: CCS study in depth, what do you think this approach - Paul Joppa 06:49:35 04/30/24 (3)

RE: CCS study in depth, what do you think this approach - Eric Chan 07:52:18 04/30/24 (1)

RE: CCS study in depth, what do you think this approach - Paul Joppa 12:06:20 04/30/24 (0)

RE: CCS study in depth, what do you think this approach - Eric Chan 07:47:11 04/30/24 (0)

You are using the resistor to buffer the CCS, so the plate (nt) - Chip647 08:37:12 04/29/24 (0)

SS simply isn't needed and I'l never do it - Triode_Kingdom 17:11:23 04/25/24 (7)

Lynn Olson used a lot of CCs circuits in his designs - Wojciech 10:44:36 05/07/24 (0)

RE: SS simply isn't needed and I'l never do it - Eric Chan 19:25:01 04/25/24 (0)

RE: SS simply isn't needed and I'l never do it - Tre' 18:56:36 04/25/24 (4)

RE: SS simply isn't needed and I'l never do it - Triode_Kingdom 09:22:47 04/26/24 (3)

RE: SS simply isn't needed and I'l never do it - PakProtector 14:40:29 04/27/24 (0)

RE: SS simply isn't needed and I'l never do it - Tre' 16:45:08 04/26/24 (1)

Got old Nait 3 and oh boy , say what you want but boring it is not by a long stretch - Wojciech 10:49:48 05/07/24 (0)

Try it for yourself and see if it makes a difference in your - Bas Horneman 02:03:05 04/25/24 (8)

RE: Try it for yourself and see if it makes a difference in your - Eric Chan 03:05:03 04/25/24 (7)

I'm just implying you should try it yourself.... - Bas Horneman 09:24:10 04/25/24 (6)

RE: I'm just implying you should try it yourself.... - Eric Chan 23:26:26 04/25/24 (5)

Junction 1k and tube plate.nt - Bas Horneman 05:52:10 04/26/24 (4)

RE: Junction 1k and tube plate.nt - Tre' 07:37:52 04/26/24 (3)

I know. But my answer was specifically tailored to his question. nt - Bas Horneman 07:47:16 04/28/24 (2)

I wasn't questioning your answer, just adding to it. even though no one ask me to :-) nt - Tre' 07:27:23 04/30/24 (1)

Thought so. Just wanted to be specific why I gave the answer I did. Thanks .nt - Bas Horneman 04:53:56 05/07/24 (0)

Follow Ups

I use CCS feeding VR tubes at the ouput of my power supplies (preamp and driver stage supplies) - Tre' 10:54:28 05/07/24 (0)

Post a Message!