|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: RE: DIY Lettering For Chassis. posted by Skip Pack on April 1, 2024 at 11:30:05:
Kicad is free and very easy to use. There are numerous Youtube videos showing how to use it and as an example here is one showing the placing of lettering and diagrams on the Front Silkscreen layer. Go to approximately 15 minutes in.
https://www.youtube.com/watch?v=qw9WIm5M5R4&t=6s
This particular video shows Version 6 and the current version is 8, but it's still very useful.
I am thinking of transferring a schematic of each of my amps etc to a PCB and then attaching the PCB to the underneath of each amp so that when I have shuffled off this mortal coil, a future tech can see what is going on.
JLCPCB is very cheap and reliable if you use the cheapest shipping option.
ray
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Kicad - RayP 15:02:45 04/01/24 (3)
- Schematics - Triode_Kingdom 20:11:17 04/01/24 (2)
- "a thumb drive velcro'd to the rear panel" - 1973shovel 04:15:53 04/09/24 (1)
- RE: "a thumb drive velcro'd to the rear panel" - Triode_Kingdom 07:24:32 04/11/24 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
