RE: SET PS

Follow Ups Full Thread

Topic - How much AC ripple is acceptable in a SE PSU? - andy evans 06:59:20 07/13/23 (111)

RE: How much AC ripple is acceptable in a SE PSU? - trobbins 16:37:37 07/13/23 (1)

Hammond prices in the UK doubled for 2023 - andy evans 07:06:02 07/15/23 (0)

Ghosts from the past? - gusser 08:11:59 07/13/23 (108)

Bringing down the ripple......? - andy evans 08:18:26 07/13/23 (107)

RE: Bringing down the ripple......? - tube wrangler 23:11:41 07/13/23 (9)

RE: Bringing down the ripple......? - PakProtector 02:40:00 07/17/23 (0)

RE: Bringing down the ripple......? - andy evans 01:08:10 07/14/23 (0)

RE: Bringing down the ripple......? - trobbins 00:03:18 07/14/23 (6)

RE: Bringing down the ripple......? - tube wrangler 13:48:25 07/14/23 (5)

System Bass - Triode_Kingdom 21:45:01 07/14/23 (4)

Agree on system - Chip647 07:14:01 07/20/23 (0)

RE: System Bass - tube wrangler 07:04:51 07/15/23 (2)

RE: System Bass - The Bored 15:24:22 07/15/23 (1)

RE: System Bass - tube wrangler 17:18:16 07/15/23 (0)

RE: Bringing down the ripple......? - Paul Joppa 21:53:44 07/13/23 (0)

RE: Bringing down the ripple......? - gusser 08:41:13 07/13/23 (95)

RE: Bringing down the ripple......? - Retsel 16:18:12 07/19/23 (4)

RE: Bringing down the ripple......? - trobbins 19:52:41 07/22/23 (0)

Allen Wright was correct - Tre' 19:25:16 07/19/23 (2)

RE: Allen Wright was correct - Retsel 14:12:41 07/21/23 (1)

RE: Allen Wright was correct - Triode_Kingdom 08:26:47 07/22/23 (0)

RE: Bringing down the ripple......? - Tre' 07:27:28 07/16/23 (88)

RE: Bringing down the ripple......? - Retsel 07:24:24 07/18/23 (10)

SET PS - Triode_Kingdom 19:06:35 07/18/23 (8)

Nice Work! (nt) - gusser 13:59:27 07/20/23 (0)

RE: SET PS - Retsel 16:10:32 07/19/23 (1)

RE: SET PS - Triode_Kingdom 16:32:22 07/19/23 (0)

ultrasonic filament supply - RayP 15:25:51 07/19/23 (4)

RE: ultrasonic filament supply - Triode_Kingdom 16:16:44 07/19/23 (3)

RE: ultrasonic filament supply - RayP 20:31:48 07/19/23 (2)

RE: ultrasonic filament supply - Triode_Kingdom 22:00:32 07/19/23 (1)

RE: ultrasonic filament supply - RayP 14:57:28 07/20/23 (0)

Love it! nt - Tre' 13:08:46 07/18/23 (0)

Is a rule of thumb. - gusser 10:01:21 07/17/23 (1)

RE: Is a rule of thumb. - Tre' 13:11:24 07/18/23 (0)

RE: Bringing down the ripple......? - sony6060 09:18:56 07/16/23 (73)

RE: Bringing down the ripple......? - Paul Joppa 14:25:01 07/18/23 (0)

RE: Bringing down the ripple......? - Tre' 08:22:39 07/17/23 (71)

RE: Bringing down the ripple......? - sony6060 08:27:36 07/17/23 (70)

RE: Bringing down the ripple......? - Tre' 10:27:30 07/18/23 (69)

RE: Bringing down the ripple......? - sony6060 11:36:36 07/18/23 (68)

RE: Bringing down the ripple......? - Tre' 13:30:18 07/18/23 (67)

RE: Bringing down the ripple......? - sony6060 13:56:49 07/18/23 (66)

RE: Bringing down the ripple......? - Tre' 14:09:52 07/18/23 (65)

RE: Bringing down the ripple......? - sony6060 14:12:11 07/18/23 (64)

Here's the chart you ask for - Tre' 14:21:24 07/18/23 (63)

I am going to try one more time - Tre' 15:39:10 07/18/23 (0)

RE: Here's the chart you ask for - sony6060 15:02:33 07/18/23 (61)

RE: Here's the chart you ask for - Tre' 15:30:15 07/18/23 (60)

RE: Here's the chart you ask for - sony6060 17:50:56 07/18/23 (59)

RE: Here's the chart you ask for - sony6060 18:04:58 07/18/23 (58)

RE: Here's the chart you ask for - trobbins 17:55:27 07/19/23 (7)

RE: Here's the chart you ask for - sony6060 17:58:42 07/19/23 (6)

RE: Here's the chart you ask for - FlaCharlie 06:47:43 07/20/23 (0)

RE: Here's the chart you ask for - Triode_Kingdom 18:39:13 07/19/23 (4)

RE: Here's the chart you ask for - sony6060 18:42:22 07/19/23 (3)

RE: Here's the chart you ask for - Triode_Kingdom 21:21:29 07/19/23 (0)

RE: Here's the chart you ask for - Tre' 19:31:47 07/19/23 (1)

I found the math - Tre' 20:16:45 07/19/23 (0)

RE: Here's the chart you ask for - Triode_Kingdom 19:35:27 07/18/23 (49)

RE: Here's the chart you ask for - sony6060 21:08:40 07/18/23 (46)

RE: Here's the chart you ask for - Triode_Kingdom 21:25:25 07/18/23 (45)

RE: Here's the chart you ask for - sony6060 21:31:28 07/18/23 (44)

RE: Here's the chart you ask for - tube wrangler 20:29:32 07/22/23 (23)

RE: Here's the chart you ask for - sony6060 00:38:36 07/23/23 (22)

RE: Here's the chart you ask for - tube wrangler 15:01:47 07/23/23 (21)

RE: Here's the chart you ask for - sony6060 16:34:14 07/23/23 (20)

RE: Here's the chart you ask for - FlaCharlie 18:56:51 07/23/23 (0)

RE: Here's the chart you ask for - Triode_Kingdom 18:07:50 07/23/23 (18)

RE: Here's the chart you ask for - sony6060 19:25:32 07/23/23 (17)

RE: Here's the chart you ask for - FlaCharlie 06:53:36 07/24/23 (16)

RE: Here's the chart you ask for - sony6060 07:02:28 07/24/23 (15)

RE: Here's the chart you ask for - FlaCharlie 07:48:21 07/24/23 (0)

As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - Tre' 07:22:29 07/24/23 (13)

RE: As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - sony6060 10:13:39 07/24/23 (12)

RE: As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - Tre' 11:13:32 07/24/23 (11)

RE: As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - sony6060 11:41:00 07/24/23 (10)

RE: As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - Tre' 12:14:42 07/24/23 (9)

RE: As long as the max rating for peak plate current is not exceeded you can use any cap value you want. - sony6060 12:27:32 07/24/23 (8)

I'm getting ready to call BS on you. - Tre' 12:37:21 07/24/23 (7)

RE: I'm getting ready to call BS on you. - sony6060 14:02:15 07/24/23 (6)

RE: I'm getting ready to call BS on you. - sony6060 14:15:23 07/24/23 (5)

RE: I'm getting ready to call BS on you. - sony6060 14:19:29 07/24/23 (4)

RE: I'm getting ready to call BS on you. - sony6060 14:27:45 07/24/23 (3)

I guess 40uf is not the maximum input cap value for a 5u4. Thanks for the info. - Tre' 15:10:45 07/24/23 (2)

RE: I guess 40uf is not the maximum input cap value for a 5u4. Thanks for the info. - sony6060 16:20:04 07/24/23 (1)

RE: I guess 40uf is not the maximum input cap value for a 5u4. Thanks for the info. - Rod M 17:13:45 07/24/23 (0)

RE: Here's the chart you ask for - trobbins 02:07:58 07/21/23 (0)

RE: Here's the chart you ask for - sony6060 06:03:25 07/19/23 (18)

One more - Tre' 15:27:50 07/19/23 (17)

RE: One more - sony6060 15:42:28 07/19/23 (16)

Who said it was a 5u4 data sheet? - Tre' 16:09:27 07/19/23 (3)

RE: Who said it was a 5u4 data sheet? - sony6060 16:13:32 07/19/23 (2)

RE: Who said it was a 5u4 data sheet? - Tre' 16:18:42 07/19/23 (1)

RE: Who said it was a 5u4 data sheet? - sony6060 17:39:03 07/19/23 (0)

RE: One more - Triode_Kingdom 16:00:35 07/19/23 (11)

RE: One more - sony6060 16:08:38 07/19/23 (10)

RE: One more - kyle 05:12:50 07/20/23 (9)

RE: One more - sony6060 07:37:18 07/20/23 (8)

RE: One more - kyle 09:29:43 07/20/23 (3)

RE: One more - sony6060 09:34:22 07/20/23 (2)

RE: One more - FlaCharlie 10:48:00 07/20/23 (0)

RE: One more - Tre' 09:41:51 07/20/23 (0)

RE: One more - Tre' 09:21:13 07/20/23 (3)

RE: One more - sony6060 09:25:35 07/20/23 (2)

RE: One more - Tre' 09:38:40 07/20/23 (1)

RE: One more - sony6060 10:00:01 07/20/23 (0)

Just for the record, here is an example of a 5ar4 where 20uf is too much capacitance. - Tre' 19:43:34 07/18/23 (1)

and another example where 220uf is just fine - Tre' 19:48:23 07/18/23 (0)

RE: Bringing down the ripple......? - sony6060 09:15:46 07/16/23 (0)

RE: Bringing down the ripple......? - Triode_Kingdom 13:07:58 07/13/23 (0)

Follow Ups

RE: SET PS - Triode_Kingdom 16:32:22 07/19/23 (0)

Post a Message!