|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: 6BM8 SE amp from r2r posted by dave j on April 11, 2007 at 12:06:49:
6bm8/ecl82 is a dual-section tube with a separate triode & power pentode within the same bottle. 12xx7's are dual-section too, with 2 separate triodes in the same bottle. Discover tube pin-outs at the link below. Now, you can draw your own schematic from observation if none is found on-line or in your public Library. As already mentioned, the 6bm8 triode section likely is a driver for it's pentode section, & the 12xx7's provide pre-amp gain stages. My stereo 6gw8/ecl86 (cousin to the 6bm8) uses 4 such tubes with the triode sections providing driver & splitter for the push-pull pentode output.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: 6BM8 SE amp from r2r - Ron Oehlert 08:48:01 04/12/07 (2)
- Thanks - dave j 10:18:33 04/12/07 (0)
- Re: 6BM8 SE amp from r2r - Ron Oehlert 08:57:47 04/12/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
