|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: McIntosh MC-60 choke need posted by ericjulius198@hotmail.com on March 9, 2007 at 14:07:56:
Stock plate chokes are 1.5 & 2.7uH. As you know, these are of molded construction. The only readily avail replacements I'm aware of are open type by JW Miller and avail from Mouser last I looked. Std values avail are 1.5 & 2.5uH.Easiest/cheapest source for PS choke will probably be Hammond. Choose one close in value and ratings with exact mounting dimensions so you don't destroy the value of the amp by drilling non-stock holes in the chassis. You could also have one custom wound but this will be expensive.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: McIntosh MC-60 choke need - Steve O 15:51:27 03/09/07 (2)
- Re: McIntosh MC-60 choke need - drlowmu 09:39:13 03/10/07 (1)
- Re: McIntosh MC-60 choke need - Steve O 11:31:42 03/10/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
