|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: power transformer advice needed posted by zobsky on March 6, 2007 at 10:29:40:
I used a pair of these when I built my very first 300B monos (overkill) about ten years ago.It's a heavy duty unit and has a 120V/240V primary, 380-320-55 (bias tap) -0-320-380 at 200mA, 6.3V at 3.5A for power and input tube filaments, as well as 5V at 3A for rectifier tubes and a 5VCT at 1.5A for a 300B filament. It is also noiseless (no faint hum or buzz. Good Luck, wpod
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Take a look at Angela Instruments Universal Transformer as well... - wpod 17:36:56 03/06/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
