|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
I just finished a Lite Audio #37 12AX7 tube phono section. I built a seperate power supply in a seperate chassis, using a 6 Ft. cable to connect the power supply to the phono section. With a Thorens TD-125, Sumiko Premier tone arm, and a Shure V15 MM cartridge, the phono section has way to much hiss for my liking.How do I eliminate hiss from this schematic? Any thoughts?
This post is made possible by the generous support of people like you and our sponsors:
Topic - 12AX7 tube phono pre-amp HISS! - elwood625 16:40:31 03/05/07 (7)
- grid stops and bypass - Ralph 15:54:00 03/06/07 (2)
- Re: grid stops and bypass - Eli Duttman 17:18:44 03/06/07 (1)
- I used to think so too- - Ralph 12:14:10 03/07/07 (0)
- Re: 12AX7 tube phono pre-amp HISS! - Michael Samra 01:26:07 03/06/07 (0)
- PLATE LOAD RESISTORS which feed high-gain.. - Thomas Martens 20:07:09 03/05/07 (0)
- Impossible to view the schematics. - sser2 17:53:25 03/05/07 (0)
- Re: 12AX7 tube phono pre-amp HISS! - Eli Duttman 17:34:15 03/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]