|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Favorite HV Umbilical Materials? posted by slowburn on March 3, 2007 at 19:04:41:
I live in Europe and I know of nothing that is legal for domestic use of 300vDC. So there seems to be no "correct" connector, just a whole load of illegal things that will unofficially do the job. Frankly, since the whole lot are illegal you may as well use anything - XLR 4 pins, 9 pin D connectors, speakon plugs, and in your case EP-4 chassis mount connectors which should be perfect - commonly available, nice high voltage rating around 600vDC for normal use except, guess what, rated 50v for European domestic use. If the EU can't be bothered to specify an acceptable domestic solution to umbilicals they're simply creating a rogue market. Totally stupid and counter-intuitive.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Favorite HV Umbilical Materials? - andy evans 16:22:25 03/04/07 (1)
- If you guys are like us - Russ57 04:38:20 03/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
