|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Re: Two filaments on a battery: bad luck? posted by randallvw on January 30, 2007 at 12:53:29:
Hi ,
Remember Kirchoff's law comes into play with that resistor . You could get away with the cheap 800mA/h Nicads and the 30's 60mA filaments . I bought 25 packs of 4 at £1($1.10) per pack , charging circuit was a LM317 per side . Did the B+ with 70 of the cheap batteries and six per side with a CV1676 . No good with 250mA filament valves such as 3A/109B though , eats the filament batteries flat within a few hourscheers
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Two filaments on a battery: bad luck? - fatbottle 14:39:35 01/30/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
