|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: I'm getting old. posted by Abraham Simpson. on January 26, 2007 at 12:15:58:
is about 2 timed Rp. You can have it higher, for example 4 times Rp, which will result in lower output power but lower distortion, too.Making a pentode output stage and then changing it to triode may not be the best idea. Triode input impedance must be lower than pentode, so driver requirements are different. But if you design the driver so that it is capable of driving a triode, it will be usable in both circuits.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Optimum triode load impedance - sser2 13:33:29 01/26/07 (3)
- Main thing to consider here is: - Thomas Martens 14:12:18 01/26/07 (1)
- "If you absolutely MUST build an amp for both modes..." - Abraham Simpson 10:29:15 01/27/07 (0)
- Re: Optimum triode load impedance - Abraham Simpson 13:55:41 01/26/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
