|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Seeing the same thing posted by Jayme on January 4, 2007 at 18:57:35:
to feed EACH first stage of your amp. They are only about $10
each from Antique electronic supply. If you feed your first stage
200UF filter cap with one of these, then you will attenuate such
LF transients to a great degree. Remember, those little 60H
Hammond chokes are pretty high resistance (about 2.7Kohms, if
I recall) and so you will have to acommodate for this to keep
your supply voltages where you want them --usually just downsizing
or eliminating whatever dropping resistor you are initially using
to feed the first stage filter cap.-Or- you could use VR tubes --but this requires more involved
calculations.The little chokes work like gangbusters, you will thank me.
Just keep 'em away from the PS trans, OPTs etc, and remember:
use two chokes, one for each individual channel's first stage.Keep me posted.
-T.M.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Use Hammond 60henry chokes... - Thomas Martens 19:20:35 01/04/07 (1)
- Re: Use Hammond 60henry chokes... - Vincin 01:10:27 01/05/07 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]