|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: How many volts can the 6c45 swing if run at 200 vp...25ma and 2.5 volts bias? posted by Iczerman on November 11, 2006 at 09:56:28:
At this voltage you only want about -1.6V on the grid for an idle current of 25mA. The max P-P voltage swing under these conditions is about 150V with a very light load such as that afforded by CCS or a high value resistor assuming a B+ 250V or so. You can also get slightly higher swing at lower current. However if max swing is absolutely essential choke loading will provide the greatest swing but the choke must be of very high quality or sonics will suffer.Rgds,
Naz
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- 6C45P Anode is rated at 150V max ... - Naz 15:26:04 11/12/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
