|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Bogen FPR60 Power Problems - Germanium/Selenium rect. posted by Wayne B on October 24, 2006 at 01:35:36:
If I recall correctly, the 1N4007 does 1000 PIV and 1 amp, so you should be good on B+, but I'm not so sure on the heaters, where the concern is current. You could use a diode with a lower PIV rating if you want on the heater supply, but watch the current draw and provide at least twice the needed capacity.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Caution on heater diodes - lipmanl 10:02:16 10/24/06 (1)
- Re: Caution on heater diodes - Wayne B 13:25:44 10/24/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
