|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: new capacitors posted by maconw on September 20, 2006 at 15:26:03:
What model Quicksilver's do you have? I'm russ57's friend with the QK's.
Mike Sanders no longer designs his amps with a plate voltage, requiring 500V caps. Those big puter grade caps in 500V are very hard to find. He "typically" used 300uf 500V Sprague or Mallory's.
Panny TSUP make them and can be had from Digikey. Cornell (CDE) 500V caps can be had from Mouser. TPC has Jensen but are very pricey. There's always an Unlytic, from MP or TPC. 260uf 600V.
Whichever caps you decide on, I'd put two or three in parallel, to equal the required replacement uf.
Russ, forgot the 1H>100uf>OPT-CT after C2.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: new capacitors - wheezer 11:02:19 09/21/06 (1)
- Thanks - Russ57 12:34:16 09/21/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
