|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: Read my post please. There were 3 questions posted by Frihed89 on July 13, 2006 at 06:20:12:
It is the quality of the metal in the laminations M4, M6, Cobalt, etc. It is in the skill of the winder and the quality of the winding equipment, the interleaving of the windings, the quality of the silver or copper for the windings, the VA (volt amp) ratings, quietness and regulation on power transformers, the frequency response and distortion overload points on output transformers and I dare say, sound quality.There are only a handfull of good quality winders left. Magnequest, ElectroPrint, Lundahl, Tamura (is it still around?). Good ones are usually expensive.
Long Live Dr.Gizmo
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Transformers are an art - Chris O 06:54:13 07/13/06 (1)
- Re: Transformers are an art - Dave-A 07:12:26 07/13/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
