|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
I was reading this russian teflon tweak (http://www.moxtone.com/PTFE_COND.htm) which I originally found in diyaudio. It's in Hungarian I think but the photos should be easy to follow.Since I don't have a vice and I have plenty of teflons, I decided that maybe I can remove the black epoxy sufficiently to expose the internal wiring.
But the solid lead seems to be quite deep and when I pulled it with some force, it came out and out came the internal stranded wire.
Does anyone think the cap is still working? thank you.
This post is made possible by the generous support of people like you and our sponsors:
Topic - does this russian teflon still works? - jarthel 07:25:14 07/10/06 (9)
- Re: Russian teflon caps... - Ivan303 11:46:19 07/10/06 (0)
- Were you trying to remove the magnetic posts? Have you ... - KIS 09:19:09 07/10/06 (6)
- just tested it on a meter and it still works. - jarthel 19:00:28 07/10/06 (4)
- What is the best way to pull out the log/post? (nt) - KIS 01:32:19 07/11/06 (3)
- imagine... - jarthel 16:10:23 07/11/06 (2)
- Now that you have done it ... - KIS 16:52:45 07/11/06 (1)
- I can't do that yet since I have yet to build the amp but... - jarthel 18:57:00 07/11/06 (0)
- yes, trying to remove that magnetic leads.. - jarthel 18:24:53 07/10/06 (0)
- Pulling the wires out of caps usually destroys them - Chris O 08:15:33 07/10/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
