heater supply question

Tube DIY Asylum

Do It Yourself (DIY) paradise for tube and SET project builders.

my heater supply has a Vout of 8.4V. this feeds 2x 8.4V heaters directly. This heater supply will also feed 2x 6.3V heaters.
because I need to use a PCB, this is the setup of 6.3V heaters:
tube 1:
pin4 => 2.5ohm 5W => 8.4V
pin 5 => heater ground
tube 2
pin4 => 8.4V
pin5 => 2.5ohm 5W => heater ground.
I am wondering if the setup for tube 2 would supply the required 6.3V.
Thanks for the help

This post is made possible by the generous support of people like you and our sponsors:

Kimber Kable

Topic - heater supply question - jarthel 16:28:54 07/04/06 (1)

Re: heater supply question - drlowmu 23:12:07 07/04/06 (0)

You can not post to an archived thread.