|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
|
|
Tube DIY Asylum Do It Yourself (DIY) paradise for tube and SET project builders. |
|
In Reply to: CCS and high plate R vs CCS etc the why is it ... posted by wlee on July 2, 2006 at 12:44:50:
Hi William,1. The gain of the tube is equal to its mu for all practical purposes.
2. No
3. The constant current is shared between the tube and the load. As the tube decreases its conductance, its plate voltage rises and the current through the load increases. This is a simplification of the basic CCS operation but is a good place to start.
4. Again, the gain is equal to mu. The high impedance in the tail keeps any signal current from flowing through the power supply.
Dave
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: CCS and high plate R vs CCS etc the why is it ... - Dave Davenport 13:12:18 07/02/06 (1)
- Re: CCS and high plate R vs CCS etc the why is it ... - wlee 11:01:16 07/05/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
