|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Nakamichi ZX9 bias adjustment? posted by on_the_edge on November 24, 2006 at 12:46:38:
Alan,
Try resetting the bias controls to maximum (counter clockwise) and level fully clockwise.
Then reset the azimuth. Then reset level and then bias to the calibration point. Re check once they are all set.
Sometimes, it helps to intentially upset the azimuth setting first then repeat the above. You should be able to match up the settings with perseverance. Tdk tapes were used for the factory settings, I Believe, so these should work best.
Let me know how you get on.
Cheers, Ben
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Nakamichi ZX9 bias adjustment? - benstratford@aol.com 14:34:42 11/24/06 (2)
- Thanks - on_the_edge 21:21:08 11/25/06 (0)
- Re: Nakamichi ZX9 bias adjustment? - on_the_edge 03:07:39 11/25/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
