|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Re: Your plan is far from being feasible. But... I want the same. posted by rotovator on October 11, 2006 at 13:17:17:
Thanks for the response. Yes, it would be necessary to put a bit of felt inside the enclosure for the additional head to make enough contact with the tape. I know for sure it's possible to make a tape delay machine using a dual cassette deck that's been modded so that a specially made tape (actually just a tape that goes through an extra-long enclosure) goes through both cassette decks (partition in the middle has been cut out). This setup would have one playback/record head in each cassette deck, and the feedback from one goes to the other after going through a pot. An example is:http://www.mzentertainment.com/studio_zdlctd105.html
but it must be possible to greatly simplify this design by simply adding a second record/playback head and as you said a felt wadge pressing up from the cassette enclosure.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Your plan is far from being feasible. But... I want the same. - John Doe 17:00:04 10/12/06 (1)
- No. No and No. - rotovator 14:13:55 10/13/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
