|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Is there any 'agreed-upon' color coding scheme for the signal leads coming out of rec/PB heads? Any help appreciated < posted by Damián on January 24, 2006 at 06:43:15:
...unless this is a pro deck like an Ampex AG440 or a Studer in which case they are may be balanced. The hot or signal lead is generally traced to a input grid in the case of tube or gate in the case of a FET or base in case of a BJT. There are no established color codes. If they are balanced then they go to an input transformer like in the AG440. You have to have a schematic! Good luck! Ray
"I take you as you are
And make of you what I will,
Skunk-bear, carcajou, bloodthirsty
Non-survivor.
Lord, let me die but not die out." THE LAST WOLVERINE by James Dickey
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- They should be shielded cables and unbalanced.... - grhughes 06:57:33 01/25/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
