|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Studer A810 input level control posted by wetchicken on January 3, 2006 at 18:50:27:
You need to access the cards. Release the two allen bolts that hold down the control panel( bottom corners,) this allows the control panel to swing up revealing the cards. The controls you need are on the Periphery controller (card.753). With the machine set to ready/rep, press ch1/level record. Press up or down to set level then store to set.There are 255 steps and the readout is in hexadecimal code. I suggest obtaining the manual before getting too adventurous.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Studer A810 input level control - Radeon 12:46:47 01/04/06 (2)
- Re: Studer A810 input level control - wetchicken 11:17:43 01/09/06 (1)
- Re: Studer A810 input level control - radeon 14:35:38 01/09/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
