|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Sure posted by stellavox on October 24, 2006 at 03:47:16:
One could maybe get away without adjusting the input resistance going from a medium impedance head in a SS deck to the high impedance input of the 351 repro amp. Depending on the head used the output of the head might be a little on the low side for the gain structure of the preamp. Bear in mind that stock 351 repro electronics sound very nice, but they are usually a little noisy. All that said Charles is right, it should work. The reverse situation of running a high impedance head from a 351 into modern SS electronics would probably require adjustments.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Sure - Doc B. 07:15:23 10/24/06 (6)
- Re: Sure - Marantzguy 09:49:03 10/24/06 (5)
- Re: Innovonics - Bodyslam 17:53:43 10/24/06 (2)
- Re: Innovonics - Marantzguy 11:22:15 10/25/06 (0)
- Re: Innovonics - Doc B. 18:03:44 10/24/06 (0)
- Re: Sure - Doc B. 13:12:51 10/24/06 (1)
- Re: Sure - Marantzguy 14:32:35 10/24/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
