Home Tape Trail

Reel to reel, cassette and other analogue tape formats.

If it's a typical wand demagnetizer

Here's the usual procedure:

Make sure the deck is off first.

Turn the demagnetizer on at least three feet away and move in slowly. Slowly work the wand across all metal surfaces (be sure not to contact the heads if your wand has a metal tip.) Slowly move away from your recorder to a distance of at least three feet, and turn the demagnetizer off.

My RS demag works great. Good luck!

Bobbo :-)


This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups
  • If it's a typical wand demagnetizer - soundnut 10:52:06 07/07/06 (0)


You can not post to an archived thread.