|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
|
|
Tape Trail Reel to reel, cassette and other analogue tape formats. |
|
In Reply to: Do bias/level calibration and azimuth lose their settings if the deck (Nak ZX-9) is unplugged.Thanks. (nt) posted by Self-Inflicted on April 4, 2015 at 10:41:07:
Anything with electrolytic caps in the circuit can go south in time. So, if the machine has been sitting around and you put a tape in that worked fine the last time you used the machine but it has issues now, it could be the sensor circuit, the tape, the power supply or a combination.
So, unless you have a way of checking the machine outside of it's built in diagnostics (a repair tech) you'll just be guessing.
I suggest you clean the machine and run it for a while. I might just need a little work out. Try using a variety of tapes. You might have one that has some issues.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Do bias/level calibration and azimuth lose their settings if the deck (Nak ZX-9) is unplugged.Thanks. (nt) - ironbut 12:35:42 04/07/15 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
