In Reply to: RE: John Repaired These Problems! posted by kyle on May 10, 2021 at 06:55:18:
Those old sand resistors were 25w each, parallel, unmounted.
The replacements are 1-50watt, unmounted. Look at the circuit and the original thread. Bias is typically set at 15v across those resistors (at idle) so do the math. These resistors don't see much current until it gets cranked up. Another words, they don't need to be mounted.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Here we go..... - deafbykhorns 13:00:53 05/10/21 (1)
- RE: Here we go..... - kyle 14:28:52 05/10/21 (0)