|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
|
|
Propeller Head Plaza Technical and scientific discussion of amps, cables and other topics. |
|
In Reply to: Re: Al and John are doing fine with his crossover mod questions posted by Dan Banquer on January 1, 2006 at 11:41:49:
That's because my response is straight forward indisputable fact...Great. That and $.75 will still get you a cup of coffee. Back to the questions raised. Based upon your expert knowledge, would you recommend:
a)"why not scrap the output pot (and its 5K load) altogether!"
b)"Alternative, I could replace the 5K pot with a higher value resistor, say 50K. "
c)"But if there's no resistor at all at the crossover (or preamp) output, isn't that the same as having a defacto 10-100M resistance (air, vinyl insulation, etc)?"That might provide useful information.
rw
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Has the New Year really started off that badly for you? - E-Stat 06:48:41 01/02/06 (8)
- Re: Has the New Year really started off that badly for you? - john curl 16:21:37 01/02/06 (6)
- No Good Deed Goes Unpunished. nt - Dan Banquer 05:31:56 01/03/06 (3)
- Yup, y'all, and that's why I don't help out no more... - Silver Eared John 17:53:10 01/03/06 (2)
- Re: Yup, y'all, and that's why I don't help out no more... - john curl 00:12:46 01/04/06 (1)
- Look who's talkin' - Silver Eared John 10:40:58 01/04/06 (0)
- For some reason, he is such a sourpuss these days - E-Stat 05:02:13 01/03/06 (1)
- If I had a village................ - Dan Banquer 05:30:02 01/03/06 (0)
- Clueless in Atlanta - Dan Banquer 07:18:34 01/02/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
