|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: Any affordable line source speaker available for 35"X70" hall? posted by cktc on October 17, 2004 at 22:22:58:
I just built a more elaborate pair of line arrays for hi fi - and some of the documentation may help you. (see link)If this is for voice mainly, I think you could get away with a line of moderately priced drivers to cover 70 - 2000, and cover the top with a single horn. You will see approaches like this in some hi fi arrays such as those from zayltron. To cover that distance I think your line should be about 10 feet long. My 40 inch lines can blow the door off at 20 feet with stunning fidelity. Mine use the vifa pl14 which I would not use in a this application - but the drivers below are made for what you are doing.
This driver:http://www.partsexpress.com/pe/pshowdetl.cfm?&PartNumber=290-540&DID=7 would be fine. you could buy 40 for 2000, the system would be very effecient. You could spend your last 1000 on preveneered plywood and a decent pair of small horns and a pair of crossovers. Without goin into line array jargon, I think that system would rock esp if hung corrrectly.
There's a couple of great designers who might help you design one at the diyaudio forum.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Diy is right - tmcconnell 16:41:55 10/19/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
