In Reply to: Re: Assisting with church's system upgrade posted by stehno on January 16, 2002 at 07:03:17:
Hiring an LOCAL acoustics consultant is within your budget. If you want to DIY with help from the web community is it also posibble but not as good.Here how the budget works
1000 for consulting
500 for system calibration
6500 for the equipment and installation.If you want me to help you with it over the web, I can
1. model the room on the computer with EASE, and CATT, and few other programs.
http://www.netg.se/~catt/
http://www.renkus-heinz.com/ease_frame.htm2. I CANNOT make real measurements of the room, a local guy can.
3. I CANNOT program the dsp and oversee the installation and make sure everything is done right like polarity, soldering joints, etc, where as a local guy canSo unless you are highly technical, you risk the enjoyment of everyone who come to church to worship every week for the next 20 years.
Tony W Mah
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Assisting with church's system upgrade - Tony Mah 08:26:27 01/16/02 (0)