|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: building keyboard speakers - driver question posted by RBS on June 23, 2005 at 19:26:28:
Stick with the 2002. The off-axis response of the 12cx demands a crossover no higher than 2 kHz, and piezos don't sound good below 3.5 kHz or so. There's also the matter of sensitivity, and the piezo runs a good 10dB less than the 2002. Piezos work fine above 3.5 kHz, and have adequate sensitivity if you use enough of them, but this is one application where a piezo is the wrong choice.
The Delta 12a is a guitar driver, and shouldn't be used in a full range application.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: building keyboard speakers - driver question - Bill Fitzmaurice 05:38:05 06/24/05 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
