Re: is it adviseable to crossover a 18" driver at 200hz?

Pro Audio Asylum

Pro studio recording equipment and music production/industry.

In Reply to: is it adviseable to crossover a 18" driver at 200hz? posted by adkins on March 31, 2004 at 22:25:25:

Hi adkins,
Crossing an 18" driver over at 200Hz might "work" but will result in a "slow", "thick" response due to the mass of a driver of that size. Depending on what you're using above 200Hz, you might be better off using an intermediate sized driver below that and above the 18" (which would be better suited to the lowest frequencies only).
Barry

This post is made possible by the generous support of people like you and our sponsors:

McShane Design

Follow Ups Full Thread

Topic - is it adviseable to crossover a 18" driver at 200hz? - adkins 22:25:25 03/31/04 (3)

Re: is it adviseable to crossover a 18" driver at 200hz? - Sean 23:23:23 05/21/04 (0)

Re: is it adviseable to crossover a 18" driver at 200hz? - bdiament 11:30:20 04/30/04 (0)

Re: is it adviseable to crossover a 18" driver at 200hz? - STUART 07:50:07 04/01/04 (0)

Follow Ups

Re: is it adviseable to crossover a 18" driver at 200hz? - bdiament 11:30:20 04/30/04 (0)

You can not post to an archived thread.