Home Pro Audio Asylum

Pro studio recording equipment and music production/industry.

DIY Diffussor

209.215.72.235

I have posted plans for a DIY diffussor.

See:
http://www.AudioAsylum.com/audio/tweaks/messages/1725.html

The latest modifications to this are to use two layers of paneling OR 1/8" plywood, to avoid too much bass energy modification. The signle panel acts a a membrane absorber at sepcific frequencies.

Also, intstead of using expaning foam, fiberglass is chaeper, and has less potential for outgassing.

For DIY bass traps, and sound absorbing wall panels, see:
http://members.nbci.com/Jon_Risch/a1.htm

Then there are:
the original post where I reveal the latest Quick & Dirty super easy bass traps recipe:
http://www.audioasylum.com/audio/tweaks/messages/15737.html
and petew's post where he goes into detail on what he did.
http://www.AudioAsylum.com/audio/general/messages/70817.html

http://www.AudioAsylum.com/audio/tweaks/messages/17498.html
PeteW's directions of building classic bass traps w/wire.

EQing a room, ie. you can't:
http://www.AudioAsylum.com/audio/tweaks/messages/17541.html

EGGCRATE FOAM INFO - bad
http://www.acousticsfirst.com/eggc.htm

Review of DIY Acoustic Treatements ala JMR:
http://www.AudioAsylum.com/audio/tweaks/messages/13654.html

DIY Room Lens clone (last half of page):
http://members.nbci.com/Jon_Risch/catch2.htm

First article by J. Peter Moncrieff on how to place ASC tubetraps.
http://www.tubetrap.com/articles/iar85.htm

Second article by J. peter Moncrieff on ASC TubeTraps
http://www.tubetrap.com/articles/iar89.htm

FR of bass traps at ASC
http://www.tubetrap.com/tt-spec.htm


Jon Risch


This post is made possible by the generous support of people like you and our sponsors:
  Sonic Craft  


Follow Ups Full Thread
Follow Ups
  • DIY Diffussor - Jon Risch 14:51:26 11/11/00 (1)


You can not post to an archived thread.