In Reply to: Re: Problems Recording Live Blues Band posted by Top Jimmy on August 22, 2003 at 09:52:42:
Thanks for your suggestion, I probably would have to have someone build that voltage divider for me...I was in electronics vocational classes about 30 years ago LoL and would have to do some serious review to design and buils something like that!
A Superscope tech recommended that instead of hooking the Presonus and Superlux mics into the XLR inputs in the front of the unit...that I should bypass the Superscope preamp and use a combination cable of 1/4"plugs into RCA plugs to connect the Presonus rig into the Aux input in the rear of the unit. I haven't had a chance to really work with that setup yet. I did try it briefly on a gig, but was getting low input levels and it soon went into a Recording Error. Perhaps because I was using the -20db pad on the Presonus the input level was too low. I really couldn't play with it much while fronting my band on a club gig. I probably need to experiment more in a rehearsal situation and try the Aux input without the Presonus -20db pad perhaps and play with the levels on the recorder...What do you think?
JHedger
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Recommendations from Superscope... - John Hedger 12:38:31 08/22/03 (0)