|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
|
|
Pro Audio Asylum Pro studio recording equipment and music production/industry. |
|
In Reply to: behringer cross mix posted by mickeymetalhead on March 18, 2001 at 10:07:39:
I assume that your fx send is on one or the aux sends, and you're returning the effects into one of the aux returns.
1. Is the effects unit sending a completely wet signal back to the board, or is it a wet/dry mix?
2.Why do you want to mix the effect into 2 different subgroups? If you are sending both guitar and drums to the same effects unit, then the signal you get back will include both guitar and drums. If this is what you want to do, then you should mix it into only one subgroup, or into the main LR mix.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: behringer cross mix - Top Jimmy 02:40:00 03/19/01 (1)
- Re: behringer cross mix - mickeymetalhead 18:32:51 03/20/01 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
