In Reply to: Re: Research Paper posted by John Swenson on February 7, 2007 at 15:40:51:
Thanks John for sharing your experience with us. Always educational. Very helpful as I'm thinking through what type of server to set up and where to place it.When you say "[I] have a very low jitter clock in the external DAC and feed it into the SB instead of its own clock. I then take the I2S signals fed to the SB DAC chip and send those to the external DAC and reclock them with the low jitter clock right before its DAC chips." The clock you feed from the dac into the SB3, is this through the same cable that transmits the i2s signal from the SB3 to the Dac for D-A conversion?
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Very helpful - RioTubes 18:59:16 02/08/07 (1)
- Re: Very helpful - John Swenson 13:29:37 02/09/07 (0)